Buy from the source and save.  We carry an extensive inventory of complete presses, parts, and auxiliaries.

 

Phone: (262) 644-5877         FAX: (262) 644-5837         Email: sales@discover-graphics.com 

Home

Equipment For Sale

Contact Information

About Discover Graphics

Additional Services

Legal Notice

 

 

 


Harris TC-3 Folder Parts & Consumables
Call or Email for Pricing, Photos & Details

 
PN Manufacturer Description (Note Blade Numbers May Vary by Manufacturer)
Call Harris Bar, Tucker Bar for TC-3  fits TC-3, QC-4,TCF50, TCF60, TCF70
WP 343668 Harris Blade Holder, 12-7/16" long x 1-3/4" wide, 6 holes 2.25" C/L between holes fits TC-3, QC-4, TCF50, TCF60, TCF70 
WP 343668 Harris Blade Holder, 12-7/16" long x 1-3/4" wide, 6 holes 2.25" C/L between holes fits TC-3, QC-4, TCF50, TCF60, TCF70 (NEW)
WP 343668 Harris Blade, Chopper Blade 12-7/16" long x 1-3/4" wide, 6 holes 2.25" C/L between holes fits TC-3, QC-4, TCF50, TCF60, TCF70 (NEW)
102691 Harris Blade, Cross Perf 7" long x 1.5" wide, 3 holes Herringbone fits TC-3, QC-4, TCF50, TCF60, TCF70 (NEW)
Call Harris Blade, Cutting Blade 10" long x 2.0" wide, 4 slots fits Harris Double Former Folder (DFF) (NEW)
102646 Harris Blade, Cutting Blade 10-3/4" long x 2.25" wide, 8 slots fits Harris Double Former Folder (DFF) (NEW)
Call Harris Blade, Jaw Blade 20" long x 3" wide, 8 slots fits TC-3, QC-4, TCF50, TCF60, TCF70 Full Length Urethane Covered (NEW)
Call Harris Blade, Tucker Blade 20" long x 2-15/16" wide, 6 slots 3.75" C/L between slots  fits TC-3, QC-4, TCF50, TCF60, TCF70 (NEW)
Call Harris Blade, Tucker Blade 20" long x 2-17/32" wide, 6 slots 3.75" C/L between slots fits TC-3, QC-4,TCF50, TCF60, TCF70 (NEW)
 WP 346862 Harris Blade, Tucker Blade 20" long x 2-3/8" wide, 6 slots 3.75" C/L between slots fits TC-3, QC-4, TCF50, TCF60, TCF70 (NEW)
X 73617 Harris Blade, Tucker Blade 21.25" long x 5-5/8" wide, 9 slots fits  TCF50 (NEW)
  Brush, 1.0" wide x 26.5" long (NEW)
WP 317920 Harris Brush, Folder Brush 4" diameter fits TC-3, QC-4, TCF50, TCF60, TCF70 (NEW)
Call Harris Brush, Guide Brush 4.0" wide x 10" long x 5/8" trim 30 degrees fits Harris Double Former Folder (DFF) pin style folder
WP 342881 Harris Brush, Head Stop  2.0" wide x 2.5"long x 5/8 trim 30 degree fits TC-3 w/ upgraded belts (NEW)
106540 Harris Brush, Head Stop 3.25" wide x 2.5 "long x 5/8 trim 30 degree fits TC-3 (NEW)
106675 Harris Brush, Tail Brush 2.0" wide, Chopper Table fits TC-3 (NEW)
Call Harris Cam Follower, Torsion Bar Cam Follower fits TC-3 folder (NEW)
Call Harris Cheekstrips, Soft Jaw Brand, Jaw Cylinder Rubber Cheeks 10.75"  fits Harris DFF, (NEW)
Cutting Rubber Harris Cutting Sticks (Cutting Rubber), .375" square x 24", 90 durometer, TC-3 (NEW)
Cutting Rubber Harris Cutting Sticks (Cutting Rubber), .585" square x 20", 90 durometer, TC-3 (NEW)
Cutting Rubber Harris Cutting Sticks (Cutting Rubber), .625" square x 23-13/16", 90 durometer, TC-3 (NEW)
Cutting Rubber Harris Cutting Sticks (Cutting Rubber), .735" square x 22", Soft durometer, TC-3 (NEW)
R22835 A Harris Cylinder Shell fits 22.750" cutoff TC-3 (NEW)
Call Harris Former Nose, Long Former Nose fits TC-3, QC-4, TCF50, TCF60, TCF70 (NEW)
10051 Harris Gripper, Fits DFF (NEW)
102790 / 448419 Harris Gripper, TC-3 delivery cylinder (NEW)
450077AK2 Harris Guide, Brass Guide Fingers for TC-3 Cylinder Shell
Call Harris Jaw Block Rubbers, 21.5" long (NEW)
Call Harris Pins, Pin Holder fits All Harris Folders (NEW)
Call Harris Pins, Tapered Impaling Pins 8-32 thread, fits All Harris Folders (NEW)
201493 Harris Roller, Knurled (Textured) Tape Drive Roller, 4.375 dia. x 1.625 bore dia., TC-3
Call Harris Roller, NIP 4.701" dia x 2.5" bore, split collar .627% gain, split collar, Urethane  Fits DFF, (NEW)
Call Harris Slitter, Backbone Slitter Assembly, Fits TC-3 (Rebuilt)
H2-5310126 Harris Tool, Cylinder Setting Knife Cut & Head Stop for 22.75" TC-3
25 CEIPPER Tool, Plier Lacer #25 Belt lacing installation tool
NCI-34RH Bodine DFF Motor, Angle bar / Compensator Motor, 115VAC,1550 RPM, 60:1
03.89/048891 SNT France Heidelberg Harris JF110 / 4D Folder, Angle Bar & Former Board Motor, Type CAT 56B4, Gear head Type RMI28FL 40:1


If you should have any questions, suggestions, or comments regarding this Web site, please contact our Webmaster.   
2018 Discover Graphics, Incorporated. All rights reserved.